Are toilets one size fits all? (2023)

Are toilets one size fits all?

Are there different sizes of toilet? Yes, toilets come in a range of different sizes, that's why it's important to measure your existing toilet seat before you buy.

How do I know what size toilet I need?

Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you're considering.

Do all toilets fit the same space?

Toilets are manufactured for "rough-in dimensions and are offered in 3 sizes: 10 inches, 12 inches, or 14 inches. When you measure from the finished wall to the center of the toilet bolts at the floor level, that will determine the rough-in size toilet you would need to purchase.

Can you get different size toilets?

Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Toilet bowl shapes: Round toilet bowls take up less room than elongated bowls, which are usually up to three inches longer.

How do I know which toilet seat will fit my toilet?

Are most toilets 2 inch or 3-inch?

A majority of toilets will use the two inch flapper; however three inch flappers have become popular in recent years and can be found in newer toilets manufactured since 2005. An easy reference for determining your toilet's flapper size is to look at the flush valve drain opening at the bottom of your tank.

How much does a plumber charge to replace a toilet?

On average, the cost to install a toilet ranges between $400 and $800. One-piece toilet labor costs range from $100 to $300. Two-piece toilets cost slightly more to install than one-piece toilets because of the additional labor. A two-piece toilet typically costs $200 to $300 to install.

Are most toilets standard size?

Measure Your Space

The standard rough-in dimensions for toilets is 12-inches. A distance of 10-inches or 14-inches is occasionally found in small bathrooms or older homes.

What do I need to know about replacing a toilet?

Is replacing a toilet easy?

Replacing and installing a new toilet isn't as hard as it sounds. All you need are a few hours, a helper and the right tools and toilet parts for the job.

Are elongated toilets the same size?

An elongated bowl is approximately 2" longer, or about 18.5". (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2" difference between the 2 sizes).

How much does it cost to install a new toilet?

According to HomeAdvisor and Angi, toilet installation costs range from $224 to $532, with the national average at $372. The overall cost depends on the type of toilet and the complexity of the job. It takes approximately 2 to 4 hours for a plumber to install a toilet at a base rate of $65 per hour.

Can I put an elongated toilet seat on a round toilet?

Elongated bidet seats and round versions share the same rear end where all the internal components are stored. The only difference is found in the length of the actual seat and lid portion. This means that either size bidet seat will be able to mount on either size toilet.

Do all toilets fit the same flange?

The choice of toilet flange depends on the material of the DWV pipe it is being connected to. That means, if you have a PVC pipe connection, you should install a PVC closet flange. A cast iron connection will require a cast iron toilet flange, and so forth.

Can I replace round toilet with elongated?

Yes, elongated toilets can take the place of round ones. However, one requirement must be met, and that is the availability of space. In terms of dimension, elongated toilets are 2 inches larger than the round style toilets. So, when you're ready to replace it, make sure there's enough room.

Do I want a round or elongated toilet?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31" from the wall, while round fixtures max out at 28". Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

How do I know if I have a 10 inch or 12 inch rough-in toilet?

You'll need to measure vertically from the bare floor to the center of the waste drain to find the rough-in size of a wall-mount or rear-outlet toilet.

Is a tall or short toilet better?

Taller toilets are best for older adults and taller people. Shorter toilets are best for children and petite adults. Standard height toilets are 14.5 to 16 inches from the ground. Comfort height toilets are 17 to 19 inches from the ground.

How do you move a toilet over 2 inches?

To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

What does 2 inch toilet mean?

Most common standard toilets are generally considered to be either “2-inch or 3-inch” by naming convention. This refers to the INSIDE pipe diameter within the toilet and down through the floor drain.

What is the difference between right height and tall height toilet?

Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches.

How long should it take a plumber to replace a toilet?

If you've done this before, it should be a piece of cake. However, if it's your first time, and depending on the complexity of the job, it could take anything from one to four hours on average.

How often do you need to replace a toilet?

Most plumbers agree that an average toilet can last around 50 years. However, this is only when the toilet is well maintained and gently used. If it was improperly installed or frequently misused, it may not last as long.

Do I need a plumber to fit a new toilet?

It's not too difficult to replace your old toilet, as long as you can connect it to an existing branch of the soil pipe. But if you want to add a new toilet in another part of your home, you should get a professional plumber to connect into the main soil pipe.

What is a comfort height toilet?

Comfort height toilets vary in height. By and large, the seat tends to stand between 17 and 19 inches from the ground (43cm to 48cm). In contrast, a standard traditional height toilet stands at around 15 inches (38cm).

Are toilets 3 inch or 4 inch?

Related Articles. Waste drain pipes for toilets in modern plumbing systems are either 3 inches or 4 inches in diameter. The wider the pipe, the more waste it can move and the less likely it will be to clog. A 4-inch pipe can carry about twice the waste of a 3-inch pipe.

What is the life expectancy of a toilet?

Share: Toilets can last for up to 50 years under average conditions. However, this doesn't mean that you won't need to spend money maintaining it throughout its useful life. Furthermore, there are many factors that could cause your toilet to fail in less than 50 years.

Do toilets come with everything you need to install?

When you purchase a new toilet, it should come with most of the parts that you'll need. Check the box and make sure it includes brass closet bolts (to connect the toilet to the flange), and a gasket for connecting the tank to the base, a wax ring, a fill valve, flush valve and flapper.

How long after installation can a toilet be used?

It can be used as soon as the water supply is turned on. Toilets are bolted to the floor flange, so there is nothing to dry or cure.

What can go wrong when changing a toilet?

What is the easiest toilet to install?

One piece or two? A two-piece toilet has a separate tank and bowl, so it's easier to install than a heavier one-piece with an integral tank and bowl. One-piece toilets have lower profiles—good for smaller bathrooms—and no tank gasket to leak.

Should you caulk around a toilet?

Without caulk around the toilet base, water can get under there and sit for a long time. Stagnant water is a breeding ground for bugs and mold. Applying silicone caulk prevents water infiltration and helps you maintain and clean and healthy bathroom.

Why are elongated toilets more popular?

An elongated bowl toilet is typically the preferred choice of adult users. The size of the bowl is convenient for men who stand when they go. It's also more comfortable for grownups to sit on. The designs are usually modern, and there are more options.

Do all elongated toilet seats fit all toilets?

No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you'll need to check yours before buying.

What is universal height toilet?

What is “Universal Height”? Universal Height refers to a toilet or integrated unit's seated height as measured from the floor to the top of the seat. While most universal height toilets are between 17″-19″, some companies, like TOTO, use the term to describe any toilet with a seated height of 16.5″ or taller.

Is it cheaper to fix a toilet or replace it?

If you're planning on replacing your toilet anytime soon, then save the money on the repair and replace the toilet instead. This will save you money in the long run, even though it will be a bigger expense up front.

Is it better to fix a toilet or buy a new one?

An occasional repair is normal, but if you're constantly having to fix toilet issues, that can become a costly and time consuming problem. One or two toilet issues is to be expected, but if you are frequently and consistently running into the same problem, or even multiple problems, a new toilet is the way to go.

How much do you save with a new toilet?

But replacing your toilet with one that meets the WaterSense standards can help you save up to 13,000 gallons of water and more than $140 every year.

What is the most comfortable toilet seat shape?

Elongated Toilet Seats:

This type of toilet seat is considered to be more comfortable by many users, but often cost a bit more. This oblong toilet seat has all the same benefits as other shapes, and can be found in a variety of colors and materials. The length of an elongated toilet seat measures at 18.5 inches.

How much space do I need for an elongated toilet?

A minimum clear floor space of 30×48 inches should be provided in front of the lav. Up to 19 inches of the 48-inch floor space can extend under the lav when a knee space is provided. The minimum clear space from the centerline of the lav to any side wall is 15 inches.

Do you need a certain size toilet?

Toilets are manufactured for "rough-in dimensions and are offered in 3 sizes: 10 inches, 12 inches, or 14 inches. When you measure from the finished wall to the center of the toilet bolts at the floor level, that will determine the rough-in size toilet you would need to purchase.

Should you replace flange when replacing toilet?

If you notice a lot of water pooling at the base of your toilet and inspect to find that your flange is cracked or broken, it's time for a replacement. Make sure to properly measure your drain pipe and drain to ensure that you choose a replacement flange kit that is the right size.

Do all toilets have the same mounting holes?

Not every toilet requires the same size hole, and clearances also vary, but there is a standard size and placement that works for most models.

Should a toilet seat overhang?

Ensure the toilet seat covers the bowl completely, there should not be a gap around the edge and it should not overhang.

Are there different size round toilets?

Round Toilet: Size. Elongated toilet bowls are oval-shaped and have a length of about 18.5 inches while round toilet bowls are circular with a length of about 16.5 inches. This can vary but these are the common lengths.

Why are some toilets round?

Like the name suggests, round toilet bowls come in a round, circular shape. This calls for the toilet to take up less space in the room. In most round toilets, the distance from the seat bolt holes to the front tip of the bowl is about 16 ½ inches – about two inches less than an elongated toilet.

How do I know if I need a 10 inch or 12 inch toilet?

A 10-inch rough-in toilet works best for bathrooms with smaller spaces. This is because the rough-in toilet size of 12 inches has a larger space requirement. And every toilet must follow plumbing rules and regulations.

Are all toilets 12 inches from wall?

That means there is 12-inches between the center of the toilet flange to the finished back wall. This information can be found on the toilet's specification sheet. 12 inches is the most common toilet rough-in size.

What is the size of a standard toilet?

Standard toilet dimensions are typically between 28–30" deep, roughly 20" wide, between 27–32" high, and have a rough-in between 10–14".

How much does it cost to install a toilet?

On average, the cost to install a toilet ranges between $400 and $800. One-piece toilet labor costs range from $100 to $300. Two-piece toilets cost slightly more to install than one-piece toilets because of the additional labor. A two-piece toilet typically costs $200 to $300 to install.

How many inches should be on each side of a toilet?

Toilets and Bidets

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture.

What is the difference between right height and normal height toilet?

Today's so-called "comfort height" or "right height" toilets feature bowls that are 17 to 19 inches high, as compared to the standard 15 inches of a regular toilet.

How do you move a toilet over 4 inches?

To move the toilet more than just a couple of inches, you will have to demolish the concrete to access and relocate water and waste lines. Then you will have to rebuild the concrete foundation and replace the sub-flooring, flooring, and fixtures.

Are elongated toilets narrower than round?

A round front bowl generally has a dimension of approximately 16.5" from the seat bolt holes to the tip of the bowl. An elongated bowl is approximately 2" longer, or about 18.5". (Note: these dimensions can change from manufacturer to manufacturer, but there is almost always about a 2" difference between the 2 sizes).

What is universal or standard height toilet?

While most universal height toilets are between 17″-19″, some companies, like TOTO, use the term to describe any toilet with a seated height of 16.5″ or taller. In comparison, a standard height toilet is between 15 and 17″ tall.